Opportunities and Challenges in the Use of TiO2 Nanoparticles Modified with Citric Acid to Synthesize Advanced Nanocomposites Based on Poly(amide-imide) Containing N,N′-(Pyromellitoyl)-bis-L-leucine Segments

In this study, the goal was the preparation, characterization, and surface morphology of poly(amide-imide)/TiO₂-citric acid nanocomposites (PAI/TiO₂-CA NCs). Owing to the high surface energy and tendency for agglomeration, the surface of TiO₂ nanoparticles was modified with citric acid. Then poly(amide-imide) was synthesized by direct polycondensation reaction of N,N′-(pyromellitoyl)-bis-L-leucine diacid with 4,4′-diaminodiphenylmethane by triphenyl phosphite and tetra-n-butylammonium bromide as a green medium. The attained polymer and modified TiO₂ nanoparticles were used to prepare PAI/TiO₂-CA NCs through ultrasonic irradiation. The resulting PAI/TiO₂-CA NC was characterized with FT-IR spectroscopy, X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis.     

Laser welding of thin foil nickel-titanium shape memory alloy

In this study, two L27 Taguchi experiments were carried out to study the effect of fibre laser welding parameters and their interactions upon the weld bead aspect ratio of nickel-titanium thin foil. The optimum parameters to produce full penetrated weld with the largest aspect ratio and desirable microstructure were successfully obtained by the Taguchi experimental design. The corrosion property of the optimized NiTi weld in Hank’s solution at 37.5 °C was studied and compared with the as-received NiTi. To improve the corrosion properties of the weld, the effect of post-weld-heat-treatments ranging from 573 to 1173 K was investigated. The corrosion properties, surface morphology, microstructure and Ti/Ni ratio of the heat-treated NiTi weld were analysed. It was found that a post-weld heat treatment at 573 K for 1 h provided the best pitting corrosion resistance at the weld zone.     

Non-contact evaluation of the resonant frequency of a microstructure using ultrasonic wave

This paper presents a novel non-contact method for evaluating the resonant frequency of a microstructure, Firstly, the microstructure under test is excited by ultrasonic waves. This excitation method does not impose any undefined load on the specimen like the electrostatic excitation and also this is the first actual use of ultrasonic wave for exciting a microstructure in the literature. Secondly, the amplitudes of the microstructure are determined by image edge detection using a Mexican hat wavelet transform on the vibrating images of the microstructure. The vibrating images are captured by a CCD camera when the microstructure is vibrated by ultrasonic waves at a series of discrete high frequencies （〉30 kHz）. Upon processing the vibrating images, the amplitudes at various excitation frequencies are obtained and an amplitude-frequency spectrum is obtained from which the resonant frequency is subsequently evaluated. A micro silicon structure consisting of a perforated plate （192 × 192 μm） and two cantilever beams （76 × 43 μm） which is about 4 μm thickness is tested. Since laser interferometry is not required, thermal effects on a test object can be avoided. Hence, the setup is relatively simple. Results show that the proposed method is a simple and effective approach for evaluating the dynamic characteristics of microstructures.     

Microelectrochemical investigation on aluminium–steel friction welds

Aluminium–steel friction welds (AlMgSi0.5/C35 and AlMgSi0.5/X5CrNi18‐10) were electrochemically investigated in a NaAc/HAc buffer (pH 5.9) and 0.1 mol/l NaCl using the microcapillary technique. This technique allows a lateral resolution of electrochemical measurements. However, microscopic investigations and scanning electron microscopy/energy dispersive X‐ray SEM/EDX measurements show that the reaction zone (RZ) and the heat affected zone (HAZ) of the welds are smaller than the microcapillary diameter. This paper discusses the advantages and limitations of the microcapillary technique in view of friction welds. Nevertheless, the electrochemical experiments allow a clear detection of the changing active surface area and the correlation to the microstructure (intermetallics). The application of microcapillary measurements on samples which were exposed in marine climate for 2 years shows a good correlation between the local potential measurements and the local corrosion phenomena. Copyright © 2010 John Wiley & Sons, Ltd.     

Ultrasonic‐Assistance and Aging Time Effects on the Zeolitation Process of BZSM‐5 Zeolite

The isomorphic substitution of boron into ZSM‐5 zeolite under static hydrothermal condition was investigated. Evaluation of hydrothermal synthesis of BZSM‐5 was performed by treating the synthesis mixture by different aging processes, namely, ultrasonic, static, stirring, and microwave‐assisted aging prior to the conventional hydrothermal treatment. The synthetic processes with different techniques of aging prior to the onset of conventional hydrothermal crystallization were compared with a process without any prior aging. The obtained results showed that the ultrasonic and microwave assisted aging shortened the crystallization time and altered the crystal size and the morphology of the obtained products. The characteristics of the synthesized products were obtained by FT‐IR spectroscopic, XRD and SEM techniques.     

Ultrasonic velocity of binary systems at elevated pressures

Various empirical theories of ultrasonic velocity have been applied to three binary liquid mixtures, under pressures up to 200 MPa and their validity have been tested. A pressure dependent study of ultrasonic velocities has been made at 303.15 K. The agreement between theory and experiment is found to be quite satisfactory.     

Analysis of benzophenone and 4-methylbenzophenone in breakfast cereals using ultrasonic extraction in combination with gas chromatography-tandem mass spectrometry (GC-MS)

Benzophenone (BP) and 4-methylbenzophenone (4MBP) are photo-initiators that are generally used to cure ink on carton boards.In this contribution, a fast and reliable method for the determination of BP and 4MBP in breakfast cereals is described. The sample was extracted ultrasonically using a mixture of dichloromethane and acetonitrile (1:1), followed by a clean-up of the extract using solid phase extraction with a silica cartridge. Finally, the extract was analysed by GC-MSⁿ. Benzophenone-d₁₀ was used as internal standard. The presented method is validated in terms of linearity, recovery, repeatability and intra-laboratory reproducibility, specificity, limit of detection and limit of quantification. In conclusion, this method is able to detect both BP and 4MBP at very low concentrations (LOD = 2 μg kg⁻¹) in breakfast cereals.     

Optical characterization of polycarbonate: Influence of additives on optical properties

In laser transmission welding of thermoplastics the optical properties of the joining parts determine the quality of the welding result. Especially, the scattering of laser radiation in the transparent welding part has an impact on weld seam properties. This scattering is caused by additives. For polycarbonate (PC) with different additives the transmittance, the reflectance and the collimated transmittance are measured with a UV‐VIS‐NIR spectrometer. From this data, the optical properties, such as scattering coefficient, absorption coefficient, and anisotropy factor are calculated. The calculations are made with the aid of the four‐flux model of radiation transport in the diffusive approximation. The results show that the additives have a significant influence on the scattering coefficient. For most additives under consideration the scattering is forward directed, which means that most of the radiation is transmitted into the absorbing welding part. However, the power density distribution of the transmitted radiation may differ significantly from PC without additives. So, the weld seam may also differ due to different additives. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 451–455, 2010     

Effect of Ultrasonic‐assisted Preparation Methods on Structure,Morphology and Optical Properties of Nanosized Cupric Oxide

Cupric oxide is a p‐type semiconductor with a narrow band‐gap which is suitable for catalysis, electrochemical cells, field emission devices and gas sensor applications. Despite considerable efforts devoted to the preparation of the nanosized CuO, there is a lack of information about ultrasonic‐assisted (US) preparation methods. Nanosized cupric oxide was successfully prepared through different ultrasonic‐assisted (US) preparation methods. Furthermore, the influence of preparation method on the structure, morphology and optical properties of nanosized CuO has been reported. XRD patterns were identical to the single‐phase pure CuO with a monoclinic structure. The enhancement of the crystallinity and crystallite size was observed for the sample prepared through the US thermal decomposition. The absorption band of CuO nanocrystals prepared through the US liquid hydrolysis shows a clear red shift of about 40 nm compared to those obtained with other preparation methods. Our results indicated that almost spherical CuO nanoparticles with an average size of 65 nm were prepared during the US thermal decomposition, while CuO rod‐like nanostructures with an average diameter of about 16 nm were obtained via the US liquid hydrolysis method. The band gap values of nanosized CuO samples were larger than the reported value for the bulk CuO. Synthesized CuO samples by US methods with adjustable and controllable properties make the applicability of cupric oxide even more versatile.     

Determination of three-dimensional solubility parameters of chlorinated polypropylene by ultrasonic degradation

The degradation reactions of chlorinated polypropylene (CPP) in toluene under ultrasonic irradiation were studied. The Mark–Houwink equation acquired from fractional precipitations was also suitable for estimating the molecular weight of degraded CPP. An objective standard was proposed for judging the solution behaviour of CPP in solvents by the study on the relative solubility of CPP before and after degradation. Then Hansen three-dimensional solubility parameters and the total parameter of CPP were obtained by optimization calculation in terms of the criterion proposed here. It was proved that the total parameter of CPP is creditable by the turbidity method. Compared to other standards, the result obtained from the proposed standard accorded well with the standard of complete miscibility suggested by Flory–Huggins for polymers and solvents as well as the objective reality. This standard may provide a reference for other polymers.